Builder Photo Gallery 1 - Phantom Executive Motorized Screens

Directions: Click on the photo to see a larger version. Click the back button on your browser to return to this page.

	Installation of u-channels prior to rocking house		Installation of u-channels prior to rocking house
	7" x 10" cavity that houses the roller, motor, and mesh		7" x 10" cavity where the beam intersects house; u-channel installed as well.
	Semi-circular application with 7" x 10" cavity installed at 90 degrees to the patio		7" x 10" cavity at 90 degrees to each other
	Close up of 7" x 10" cavity		Completed brick columns with recessed u-channels and finished out 7" x 10" cavity
	Side view of completed brick columns with recessed u-channels and finished 7" x 10" cavity		Close up of recessed u-channels and finished out 7" x 10" cavity
	Electrical placement; need one dual 110 volt receptacle at each column; run two motors off one outlet		Electrical placement when iron beams are used; need one plug per screen
	Electrical placement showing one plug per screen		Roller placement inside the 7" x 10" housing; brackets at each end, tracks recessed inside door jam
	Full arch application with stucco finish		Full arch application with individual access panels per arch
	Full arch construction stage showing the 7" x 10" cavity above the arch		Full arch construction stage showing the individual access panels removed
	Full arch with stone finish with access panels blending into the ceiling finish work		Full arch with stone finish showing construction stage
	Full arch with stone finish with access panels blending into the ceiling finish work		Full arch with stone finish showing construction stage
	Solid cedar beam application		Solid cedar beam application showing how the 7” x 10” cavity was constructed; brackets installed
	Solid cedar beam application showing the removable access panel		Solid cedar beam application showing how the 7" x 10" cavity was constructed
	Solid cedar beam application showing the 7" x 10" cavities 90 degrees from each other